Alpenföhn Wing Boost 3 Rgb Review

Introduction

Alpenföhn's Broken 3 is an iconic CPU Aircooler. With the latest refresh of the line, the libation is now also available in an all-black and all-white version. Permit's take a closer await at the Broken 3 in White and see how it compares to our other air coolers.

Positive

• Racket
• Vibrations happening
• Fans include PWM Splitter

Neutral

• Adequate Racket-Functioning ratio

Negative

• Questionable functioning for the size

What's in the Box?

In one case the box the Broken iii comes in is opened, we volition observe the following items:

• Alpenföhn Broken three
• Alpenföhn Wing Heave three 140mm
• 4x Mounting Clips
• 4x Mounting Rubber
• Installation Hardware Intel
• Installation Hardware AMD
• Thermal Paste
• Screwdriver

The included Philips screwdriver is a necessary tool in social club to install the Broken iii onto your CPU. At a certain point, you will exist forced to apply a relatively long screwdriver in order to screw in one of the screws which are belongings the heatsink in identify. As Alpenföhn cannot exist certain that everybody owns a screwdriver of this length, they added i in the package.

On the back of the Packaging, Alpenföhn added a couple of features and short explanations of the Broken 3. Nosotros summarized the almost important specs downward beneath:

Name	Alpenföhn Broken iii White
Dimensions	161x100x150mm
Fan Airflow	59 CFM
Fan Noise	< 22db
Fan Air Pressure	- not specified -
Fan Speed	1050 RPM
Fan Connectedness	4-Pin PWM
Fan RGB	- none -

Compatibility

The Broken iii in both White and Black is compatible with a surprising amount of sockets. We listed all of them downwardly below:

Intel	AMD
LGA 1200	AM4
LGA 1156	AM3+
LGA 1155	AM3
LGA 1151	AM2+
LGA 1150	AM2
LGA 2011	FM1
LGA 1366
LGA 775
LGA 2011-3

Individual Components

Fan

The Fans provided with an Alpenföhn Broken three are Alenföhns own Wing Boost three. These 140mm Fans are capable of spinning at 1050RPM while pushing 59 CFM at an unspecified amount of static pressure.

A positive surprise to these fans is Alpenföhns fan mounting system. Included in the box are two sets of rubber nobs which are supposed to be pressed into the fan's screw holes. In order to mount the fans, the provided fan clips are meant to be stuck into the heart of these rubber pieces, partially keeping them in place and making it surprisingly like shooting fish in a barrel to install and remove the fan, without the risk of the clip falling off.

Another squeamish surprise is that each of the fans provides y'all with an included PWM splitter in form of a minor header which is added to the fan's PWM connector. This way, yous can connect one fan to the other, thus using only a single PWM header on your motherboard.

Heatsink

Every bit we chose the Cleaved three in its white edition, we also got the impressively looking all-white Heatsink.

At the lesser of the heatsink, Alpenföhn used v straight-touch copper oestrus pipes which are meant to transport up to 225W TDP to the upper fins.

Speaking of fins, instead of the usual arroyo of stacking as many fins together every bit closely as possible, Alpenföhn went with a unlike approach.

The and then-chosen "Aerodynamically Optimized Fins" are beingness in a way that resembles an eagle with the outer end of each fin being slightly lower than the central part. Additionally, we observed that the fins on the Brocken 3 are significantly further autonomously than nosotros are used to. An approach that reminded us of Noctua's passive CPU cooler.

Installation

Intel

In order to install the Broken 3 on an Intel CPU, we first need to take the provided backplate with the "This side for intel" text pointing upward.

Later placing four Screws into the outer holes of the frame, nosotros tin secure them with plastic holders. (Outer: LGA 775, Central: LGA 1200/115x, Inner: LGA 775).

At this betoken, nosotros tin position the backplate backside the Motherboards, add the spacers on top with the memory brackets and spiral everything downward with the thumbscrews.

Now we can position the cooler on the CPU, and screw it downwardly using the provided screwdriver. Ane screw is immediately accessible on the side, while the other one tin be accessed past using the hole at the top of the cooler.

AMD

While using an AMD CPU, nosotros have to rotate the provided backplate and identify the provided screws into the inner holes. (Inner: AM3+, Outer: AM4).

After locking the screws in place by using the provided plastic spiral holders, nosotros tin can remove the pre-installed AMD retention brackets and backplate from the motherboard and replace them with the new backplate.

After positioning the spacers and AMD retention brackets onto the new backplate, we can mountain everything downwardly with the thumbscrews.

Now we tin position the cooler on the CPU, and screw it down using the provided screwdriver. One screw is immediately accessible on the side, while the other i can exist accessed by using the hole at the top of the cooler.

Criterion

Every bit any other CPU cooler, Alpenföhn's Broken 3 is non exempt from performing, therefore we put it on our testbench with our Ryzen 3900x at four.36Ghz and one.4vCore.

While letting the Fans spin at 100% of their speed, the Broken 3 managed to continue the CPU at 84°C, slightly behind the much smaller Akasa Soho h4.

While lowering the Fan speed in 10% increments, the Broken 3 upheld its position while slowly budgeted the other coolers which began with a headstart.

Although the Broken iii begins with an splendid Noise level, it'due south deadening fan speed speedily requires the fans to ramp upwardly, leading to a couple of lost positions and an early exit compared to the Freezer l and Dark Rock Pro 4.

The Issue with the Fans

Unfortunately, nosotros ran into a huge upshot while benchmarking the Alpenföhn Cleaved 3.

As it turned out, both fans which were included in our re-create of the cooler were not balanced also as fans are supposed to.

Once we removed the fans from the heatsink and held them in our hands, we were able to feel how the rotation of the fan had irregularities resulting in strong kicks in unlike directions.

This beliefs starts one time the fan reaches 80-100% of its PWM.

Once the beliefs begins, the vibrations of the fans are forwarded to the heatsink, catastrophe upward with a vibrating heatsink that volition slowly vibrate the screws out of their thread, leading to potential damage.

Conclusion

In general, Alpenföhn'due south Broken 3 White did not perform badly at all. As the benchmark showed, it was able to outperform most of our smaller or upkeep-oriented coolers. However, when compared to similarly-sized coolers like Be Quiet'southward Nighttime Rock Pro four or Arctic's Freezer 50, it wasn't able to go along upwardly the low temperatures. On the noise side, it is the same story. Certain it'due south quieter than most "cheaper" alternatives, merely once you add a Be Placidity! to the list it'south game over.

All of that being said, we cannot ignore the outcome with the unbalanced Fans resulting in heavy vibrations of the whole cooler. No matter how serenity the fans are, it is always better to thermal throttle than to have broken gear. Even if we cannot verify if there are more copies of Alpenhöhn'due south libation out there that take the same effect as ours, it is still a possibility that we have to keep in listen.

Therefore, we cannot recommend this cooler, and if yous do own one of them, delight brand sure to check if yours does not accept the aforementioned outcome, and if so, please regulate your fan speed to avoid it.

Alpenföhn Wing Boost 3 Rgb Review,

Source: https://www.sts-tutorial.com/review/alpenfoehn-broken-3

Posted by: crowderroonstank.blogspot.com

Share this post